Hello! Installed openvpn on my VPS server with Centos 6.5. Made everything by this guide -
http://solutionsatexperts.com/how-to-install-openvpn-on-centos-6-x/ Everything configured ok. Than installed openvpn client on Windows 7. Made config changes according to my server configuration, coppied all required certificates. OpenVPN connects with no problem. But when i check my ip adress - i see that nothing changes. I see that openvpn is "green" and connected, but ip doesnt change. What can cause this problem.
Thanks for everyone for any help. Good luck and have a nice day !!!
Here is my logs -
Sat Jun 21 13:57:18 2014 OpenVPN 2.3.4 i686-w64-mingw32 [SSL (OpenSSL)] [LZO] [PKCS11] [IPv6] built on Jun 5 2014
Sat Jun 21 13:57:18 2014 library versions: OpenSSL 1.0.1h 5 Jun 2014, LZO 2.05
Enter Management Password:
Sat Jun 21 13:57:18 2014 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:25340
Sat Jun 21 13:57:18 2014 Need hold release from management interface, waiting...
Sat Jun 21 13:57:18 2014 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:25340
Sat Jun 21 13:57:18 2014 MANAGEMENT: CMD 'state on'
Sat Jun 21 13:57:18 2014 MANAGEMENT: CMD 'log all on'
Sat Jun 21 13:57:19 2014 MANAGEMENT: CMD 'hold off'
Sat Jun 21 13:57:19 2014 MANAGEMENT: CMD 'hold release'
Sat Jun 21 13:57:19 2014 Socket Buffers: R=[8192->8192] S=[8192->8192]
Sat Jun 21 13:57:19 2014 UDPv4 link local: [undef]
Sat Jun 21 13:57:19 2014 UDPv4 link remote: [AF_INET]109.120.165.116:1194
Sat Jun 21 13:57:19 2014 MANAGEMENT: >STATE:1403348239,WAIT,,,
Sat Jun 21 13:57:19 2014 MANAGEMENT: >STATE:1403348239,AUTH,,,
Sat Jun 21 13:57:19 2014 TLS: Initial packet from [AF_INET]109.120.165.116:1194, sid=74741249 8566f34d
Sat Jun 21 13:57:19 2014 VERIFY OK: depth=1, C=IN, ST=AP, L=Hyderabad, O=SolutionsatExperts, OU=IT, CN=SolutionsatExperts CA, name=admin, emailAddress=
admin@solutionsatexperts.com
Sat Jun 21 13:57:19 2014 VERIFY OK: nsCertType=SERVER
Sat Jun 21 13:57:19 2014 VERIFY OK: depth=0, C=IN, ST=AP, L=Hyderabad, O=SolutionsatExperts, OU=IT, CN=server, name=admin, emailAddress=
admin@solutionsatexperts.com
Sat Jun 21 13:57:20 2014 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key
Sat Jun 21 13:57:20 2014 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Sat Jun 21 13:57:20 2014 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key
Sat Jun 21 13:57:20 2014 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Sat Jun 21 13:57:20 2014 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 2048 bit RSA
Sat Jun 21 13:57:20 2014 [server] Peer Connection Initiated with [AF_INET]109.120.165.116:1194
Sat Jun 21 13:57:21 2014 MANAGEMENT: >STATE:1403348241,GET_CONFIG,,,
Sat Jun 21 13:57:22 2014 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1)
Sat Jun 21 13:57:22 2014 PUSH: Received control message: 'PUSH_REPLY,route 10.8.0.1,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5'
Sat Jun 21 13:57:22 2014 OPTIONS IMPORT: timers and/or timeouts modified
Sat Jun 21 13:57:22 2014 OPTIONS IMPORT: --ifconfig/up options modified
Sat Jun 21 13:57:22 2014 OPTIONS IMPORT: route options modified
Sat Jun 21 13:57:22 2014 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Sat Jun 21 13:57:22 2014 MANAGEMENT: >STATE:1403348242,ASSIGN_IP,,10.8.0.6,
Sat Jun 21 13:57:22 2014 open_tun, tt->ipv6=0
Sat Jun 21 13:57:22 2014 TAP-WIN32 device [Подключение по локальной сети 2] opened: \\.\Global\{5D1D31E6-A43C-4419-A653-D2B1FAFF7EF0}.tap
Sat Jun 21 13:57:22 2014 TAP-Windows Driver Version 9.9
Sat Jun 21 13:57:22 2014 Notified TAP-Windows driver to set a DHCP IP/netmask of 10.8.0.6/255.255.255.252 on interface {5D1D31E6-A43C-4419-A653-D2B1FAFF7EF0} [DHCP-serv: 10.8.0.5, lease-time: 31536000]
Sat Jun 21 13:57:22 2014 Successful ARP Flush on interface [22] {5D1D31E6-A43C-4419-A653-D2B1FAFF7EF0}
Sat Jun 21 13:57:24 2014 TEST ROUTES: 1/1 succeeded len=1 ret=1 a=0 u/d=up
Sat Jun 21 13:57:24 2014 MANAGEMENT: >STATE:1403348244,ADD_ROUTES,,,
Sat Jun 21 13:57:24 2014 C:\Windows\system32\route.exe ADD 10.8.0.1 MASK 255.255.255.255 10.8.0.5
Sat Jun 21 13:57:24 2014 env_block: add PATH=C:\Windows\System32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
Sat Jun 21 13:57:24 2014 Initialization Sequence Completed
Sat Jun 21 13:57:24 2014 MANAGEMENT: >STATE:1403348244,CONNECTED,SUCCESS,10.8.0.6,109.120.165.116
Here is my Config -
client
dev tun
proto udp
remote public.IP 1194
resolv-retry infinite
nobind
persist-key
persist-tun
ca C:/keys/ca.crt
cert C:/keys/client1.crt
key C:/keys/client1.key
ns-cert-type server
comp-lzo
verb 3
route-method exe
route-delay 2
