Hallo,
I can connect to VPN server over wifi network but when I try over LAN network, connection fails. Can someone look at my config file and point out changes ?
Thanks in advance
Connection log:
Thu Jun 12 14:38:01 2014 OpenVPN 2.3.4 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [PKCS11] [IPv6] built on Jun 5 2014
Thu Jun 12 14:38:01 2014 library versions: OpenSSL 1.0.1h 5 Jun 2014, LZO 2.05
Thu Jun 12 14:38:01 2014 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:25340
Thu Jun 12 14:38:01 2014 Need hold release from management interface, waiting...
Thu Jun 12 14:38:01 2014 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:25340
Thu Jun 12 14:38:01 2014 MANAGEMENT: CMD 'state on'
Thu Jun 12 14:38:01 2014 MANAGEMENT: CMD 'log all on'
Thu Jun 12 14:38:01 2014 MANAGEMENT: CMD 'hold off'
Thu Jun 12 14:38:01 2014 MANAGEMENT: CMD 'hold release'
Thu Jun 12 14:38:03 2014 MANAGEMENT: CMD 'proxy NONE '
Thu Jun 12 14:38:05 2014 Control Channel Authentication: using 'auth.key' as a OpenVPN static key file
Thu Jun 12 14:38:05 2014 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Thu Jun 12 14:38:05 2014 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Thu Jun 12 14:38:05 2014 Socket Buffers: R=[65536->65536] S=[65536->65536]
Thu Jun 12 14:38:05 2014 MANAGEMENT: >STATE:1402576685,RESOLVE,,,
Thu Jun 12 14:38:05 2014 UDPv4 link local: [undef]
Thu Jun 12 14:38:05 2014 UDPv4 link remote: [AF_INET]xxx.xxx.xxx.xxx:1194
Thu Jun 12 14:38:05 2014 MANAGEMENT: >STATE:1402576685,WAIT,,,
Config file:
##############################################
# Sample client-side OpenVPN 2.0 config file #
# for connecting to multi-client server. #
# #
# This configuration can be used by multiple #
# clients, however each client should have #
# its own cert and key files. #
# #
# On Windows, you might want to rename this #
# file so it has a .ovpn extension #
##############################################
# Specify that we are a client and that we
# will be pulling certain config file directives
# from the server.
client
# Use the same setting as you are using on
# the server.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun
# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel
# if you have more than one. On XP SP2,
# you may need to disable the firewall
# for the TAP adapter.
;dev-node MyTap
# Are we connecting to a TCP or
# UDP server? Use the same setting as
# on the server.
;proto tcp
proto udp
# The hostname/IP and port of the server.
# You can have multiple remote entries
# to load balance between the servers.
#remote my-server-1 1194
#;remote my-server-2 1194
remote vpn.xxx.com 1194
;remote vpn.xxx.com 1194
# Choose a random host from the remote
# list for load-balancing. Otherwise
# try hosts in the order specified.
;remote-random
# Keep trying indefinitely to resolve the
# host name of the OpenVPN server. Very useful
# on machines which are not permanently connected
# to the internet such as laptops.
resolv-retry infinite
# Most clients don't need to bind to
# a specific local port number.
nobind
# Downgrade privileges after initialization (non-Windows only)
;user nobody
;group nobody
# Try to preserve some state across restarts.
persist-key
persist-tun
# If you are connecting through an
# HTTP proxy to reach the actual OpenVPN
# server, put the proxy server/IP and
# port number here. See the man page
# if your proxy server requires
# authentication.
;http-proxy-retry # retry on connection failures
;http-proxy [proxy server] [proxy port #]
# Wireless networks often produce a lot
# of duplicate packets. Set this flag
# to silence duplicate packet warnings.
;mute-replay-warnings
# SSL/TLS parms.
# See the server config file for more
# description. It's best to use
# a separate .crt/.key file pair
# for each client. A single ca
# file can be used for all clients.
ca xxx.crt
cert xxx.crt
key xxxx.key
# Verify server certificate by checking
# that the certicate has the nsCertType
# field set to "server". This is an
# important precaution to protect against
# a potential attack discussed here:
#
http://openvpn.net/howto.html#mitm
#
# To use this feature, you will need to generate
# your server certificates with the nsCertType
# field set to "server". The build-key-server
# script in the easy-rsa folder will do this.
ns-cert-type server
# If a tls-auth key is used on the server
# then every client must also have the key.
tls-auth auth.key 1
# Select a cryptographic cipher.
# If the cipher option is used on the server
# then you must also specify it here.
;cipher x
# Enable compression on the VPN link.
# Don't enable this unless it is also
# enabled in the server config file.
comp-lzo
# Set log file verbosity.
verb 3
# Silence repeating messages
;mute 20
