Hi,
I connect my server at a friend openvpn server.
When i'm connected, I arrive to ping the internet box :
PING 192.168.1.254 (192.168.1.254) 56(84) bytes of data.
64 bytes from 192.168.1.254: icmp_req=1 ttl=64 time=1.01 ms
But i don't arrive to connect me with ssh with a public IP (it's ok with a private IP)
My openvpn configuration is :
; OpenVPN Config
client
dev tap
proto tcp
;remote X.X.X.X 1194
remote ssh.toto.in 1194
resolv-retry infinite
nobind
persist-key
persist-tun
ca ca.crt
cert toto.crt
key toto.key
ns-cert-type server
comp-lzo
verb 3
ifconfig i'm connected at the openvpn server :
ifconfig
eth0 Link encap:Ethernet HWaddr X.X.X.X.X.X
inet addr:192.168.1.20 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: X.X.X.X.X.X.X.X.X Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:321878 errors:0 dropped:0 overruns:0 frame:0
TX packets:149023 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:380050629 (362.4 MiB) TX bytes:12834033 (12.2 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:47909 errors:0 dropped:0 overruns:0 frame:0
TX packets:47909 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:370314181 (353.1 MiB) TX bytes:370314181 (353.1 MiB)
tap0 Link encap:Ethernet HWaddr X.X.X.X.X.X.X
inet addr:172.X.X.X Bcast:172.X.X.X Mask:255.255.255.0
inet6 addr: X.X.X.X.X.X.X.X Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:26 errors:0 dropped:0 overruns:0 frame:0
TX packets:78 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:2244 (2.1 KiB) TX bytes:15752 (15.3 KiB)
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:10.20.0.1 P-t-P:10.20.0.2 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Can you help me please?
