Hi,
I have a very strange problem with my VPN tunnel, i get 0.5 mbit download and 10 mbit upload (tunnel capped at 10mbit so upload is full speed). I've tested everything i can client side, i am not running the server but the technicans i'm buying the vpn from says there's nothing wrong on their side, what could i be doing wrong?
Here's the configuration i'm using (client side):
dev tap
remote 88.80.xx.x
float 88.80.xx.x
port 50xx
ifconfig 88.80..xx.x 255.255.255.128
route-gateway 88.80.xx.x
redirect-gateway def1
secret xxx.key
cipher AES-128-CBC
dhcp-option DNS 88.xx.x.x
route-method exe
route-delay 2
- I've tried to enable comp-lzo without difference.
I've tried to add mssfix 1400 without difference.
I've tried to install 4 different versions of openvpn, actually if i'm using the latest one my download speed was capped at 1mbit so i'm using an older build 2.1.4 which gives me best results since upload is 10 atleast.
I've tried to use "TUN" instead but can't get it to work, i'm guessing the server side must be configured to use TUN for that to work?
I've tried to disable encryption but i can't connect without it, i'm thinking the server side must disable encryption too for that to work, but disabling encryption would only be to test if that's the issue, the whole point of having the tunnel is sort of the encryption part.
I've checked the cpu usage under vpn bandwidth load and it doesn't move.
I've tried setting openvpn to high priority without any difference.
Any ideas guys, would be highly appreciated
