vpnuserfan
Dear all,
I did successfully installed OpenVPN on a dedicated server 100 mbps.
Could connect all works fine. Only i did notice the download speed is max 2mbps.
Can i post it here ? Or is there a payed support ? Please let me know ...
Debian network interface (Hetzner.de)
auto lo
iface lo inet loopback
# device: eth0
auto eth0
iface eth0 inet static
address 78.46.71.x
broadcast 78.46.71.223
netmask 255.255.255.224
gateway 78.46.71.193
# default route to access subnet
up route add -net 78.46.71.192 netmask 255.255.255.224 gw 78.46.71.193 eth0
Clean installation on Debian. No firewall no extra's
My config:
/etc/openvpn # grep -vE '^#|^;|^$' server.conf
port 1194
proto udp
dev tun
ca ca.crt
cert server2.crt
key server2.key # This file should be kept secret
dh dh1024.pem
server 10.8.0.0 255.255.255.0
ifconfig-pool-persist ipp.txt
keepalive 10 120
comp-lzo
persist-key
persist-tun
status openvpn-status.log
verb 3
I use OpenVPN Version 2.2.1-8+deb7u2
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:172.16.107.1 P-t-P:172.16.107.2 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
eth0 Link encap:Ethernet HWaddr 6c:62:6d:d9:0a:96
inet addr:46.4.x.y Bcast:46.4.x.255 Mask:255.255.255.255
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Could connect as usual:
Wed Apr 23 13:12:30 2014 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key
Wed Apr 23 13:12:30 2014 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Wed Apr 23 13:12:30 2014 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key
Wed Apr 23 13:12:30 2014 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Wed Apr 23 13:12:30 2014 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA
Wed Apr 23 13:12:30 2014 [server2] Peer Connection Initiated with [AF_INET] 78.46.x.y:1194 <--- My Debian server
Wed Apr 23 13:12:31 2014 MANAGEMENT: >STATE:1398251551,GET_CONFIG,,,
Wed Apr 23 13:12:32 2014 SENT CONTROL [server2]: 'PUSH_REQUEST' (status=1)
Wed Apr 23 13:12:32 2014 PUSH: Received control message: 'PUSH_REPLY,route 10.8.0.1,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5'
Wed Apr 23 13:12:32 2014 OPTIONS IMPORT: timers and/or timeouts modified
Wed Apr 23 13:12:32 2014 OPTIONS IMPORT: --ifconfig/up options modified
Wed Apr 23 13:12:32 2014 OPTIONS IMPORT: route options modified
Wed Apr 23 13:12:32 2014 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Wed Apr 23 13:12:32 2014 MANAGEMENT: >STATE:1398251552,ASSIGN_IP,,10.8.0.6,
Wed Apr 23 13:12:32 2014 open_tun, tt->ipv6=0
Wed Apr 23 13:12:32 2014 TAP-WIN32 device [LAN-verbinding 28] opened: \\.\Global\{C20D36A6-FD19-482F-A061-490FB847CF8A}.tap
Wed Apr 23 13:12:32 2014 TAP-Windows Driver Version 9.9
Wed Apr 23 13:12:32 2014 Notified TAP-Windows driver to set a DHCP IP/netmask of 10.8.0.6/255.255.255.252 on interface {C20D36A6-FD19-482F-A061-490FB847CF8A} [DHCP-serv: 10.8.0.5, lease-time: 31536000]
Wed Apr 23 13:12:32 2014 Successful ARP Flush on interface [2] {C20D36A6-FD19-482F-A061-490FB847CF8A}
Wed Apr 23 13:12:37 2014 TEST ROUTES: 1/1 succeeded len=1 ret=1 a=0 u/d=up
Wed Apr 23 13:12:37 2014 MANAGEMENT: >STATE:1398251557,ADD_ROUTES,,,
Wed Apr 23 13:12:37 2014 C:\WINDOWS\system32\route.exe ADD 10.8.0.1 MASK 255.255.255.255 10.8.0.5
Wed Apr 23 13:12:37 2014 Route addition via IPAPI succeeded [adaptive]
Wed Apr 23 13:12:37 2014 Initialization Sequence Completed
Wed Apr 23 13:12:37 2014 MANAGEMENT: >STATE:1398251557,CONNECTED,SUCCESS,10.8.0.6,78.46.x.y <--- My Debian server
