Hello everybody,
I'm new on openvpn. I've set up OpenVPN on a Centos 6 server. I'm following this guide
https://community.openvpn.net/openvpn/wiki/BridgingAndRouting - using routing, but eth1 connect to internal network and eth0 connect to local network.
But my client cannot connect to internal network.
this is my configuration
Internal network : 192.168.0.0/24
VPN server : a.b.c.21
client : a.b.c.124
eth1 : 192.168.0.172
server
port 1194 #- port
proto udp #- protocol
dev tun
topology subnet
tun-mtu 1500
tun-mtu-extra 32
mssfix 1450
reneg-sec 0
ca /etc/openvpn/easy-rsa/2.0/keys/ca.crt
cert /etc/openvpn/easy-rsa/2.0/keys/server.crt
key /etc/openvpn/easy-rsa/2.0/keys/server.key
dh /etc/openvpn/easy-rsa/2.0/keys/dh1024.pem
plugin /usr/lib64/openvpn/plugin/lib/openvpn-auth-pam.so login
#plugin /etc/openvpn/radiusplugin.so /etc/openvpn/radiusplugin.cnf
client-cert-not-required
username-as-common-name
server 10.8.0.0 255.255.255.0
push "redirect-gateway def1"
push "route 192.168.0.0 255.255.255.0"
keepalive 10 120
comp-lzo
persist-key
persist-tun
client
client
dev tun
proto udp
remote a.b.c.21 1194
resolv-retry infinite
nobind
tun-mtu 1500
tun-mtu-extra 32
mssfix 1450
persist-key
persist-tun
ca ca.crt
auth-user-pass
comp-lzo
reneg-sec 0
verb 3
iptables
Table: filter
Chain INPUT (policy ACCEPT)
num target prot opt source destination
Chain FORWARD (policy ACCEPT)
num target prot opt source destination
1 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED
2 ACCEPT all -- 192.168.0.0/24 0.0.0.0/0 ctstate NEW
3 ACCEPT all -- 10.8.0.0/24 0.0.0.0/0 ctstate NEW
4 ACCEPT all -- 10.8.0.0/24 192.168.0.0/24 ctstate NEW
Chain OUTPUT (policy ACCEPT)
num target prot opt source destination
Table: nat
Chain PREROUTING (policy ACCEPT)
num target prot opt source destination
Chain POSTROUTING (policy ACCEPT)
num target prot opt source destination
1 MASQUERADE all -- 192.168.0.0/24 0.0.0.0/0
2 MASQUERADE all -- 10.8.0.0/24 0.0.0.0/0
Chain OUTPUT (policy ACCEPT)
num target prot opt source destination
