Windows Server 2012 / Windows 7 Configuration

centuryx476

Hello,

I have openVPN server on a windows server 2012 R2 and all my clients are windows 7 and windows 8 computers.

Basically here is my setup for a windows 8 computer that is in the same network as the server.

Server Config File

;local a.b.c.d
port 1194
proto udp
dev tun

ca Cert Path
cert Cert Path
key Key Path

dh Path Removed for security reason

server 10.8.0.0 255.255.255.0

ifconfig-pool-persist ipp.txt

;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100
;server-bridge

;push "route 192.168.10.0 255.255.255.0"
;push "route 192.168.20.0 255.255.255.0"

push "redirect-gateway def1 bypass-dhcp"

push "dhcp-option DNS 208.67.222.222"
push "dhcp-option DNS 208.67.220.220"

keepalive 10 120

cipher AES-256-CBC

comp-lzo

persist-key
persist-tun

log         openvpn.log

verb 5

Client Config File - Windows 8

client

dev tun

proto udp

remote IP Removed for Security Reasons 1194
resolv-retry infinite

nobind

persist-key
persist-tun

ca Certificate Path
cert Certificate Path
key Key Path


ns-cert-type server

cipher AES-256-CBC

comp-lzo

verb 5

pull 
route-method exe
route-delay 2


;mute 20

So basically the client can connect to the vpn server and I can ping it but I cannot reach the internet.

Any suggestions?

Thank you

centuryx476

I have gone through those pages but isnt most of those examples for Linux?

centuryx476

debbie10t wrote
centuryx476 wrotebut isnt most of those examples for Linux?
which is why you need to add routing to your server side router ..

When you say routing, what do you mean?

Add lines of code to the config file, install something else?

Is their any place you can point to where they have working examples with pure windows based servers?

I cannot find any..

I' am not a stranger to Linux at all I just don't want to use it in this case.

Thank you