Hello everyone! I'm in the process of setting up an OpenVPN network for my home use. The OpenVPN server (running on Debian) is behind a router, on which I've configured a static route (10.8.7.0/24 -> 192.168.100.5) and opened the external port via port forwarding. I've also enabled IP forwarding on the OpenVPN server. The server (192.168.100.5) I have configured with [i]tun[/i] & [i]topology subnet[/i], by default the clients get an address in the [i]10.8.7.0/24[/i] network. [code] dev tun topology subnet server 10.8.7.0 255.255.255.0 push "route 192.168.100.0 255.255.255.0" [...][/code] Now I want my VPN clients to access the 192.168.100.0/24 network, so I'm pushing the [i]route 192.168.100.0 255.255.255.0[/i] From the Bridging & Routing website (https://community.openvpn.net/openvpn/wiki/BridgingAndRouting) I've taken these iptables rules: [code] # Allow traffic initiated from VPN to access LAN iptables -I FORWARD -i tun0 -o eth0 -s 10.8.7.0/24 -d 192.168.100.0/24 -m conntrack --ctstate NEW -j ACCEPT # Allow established traffic to pass back and forth iptables -I FORWARD -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT[/code] Now when using these settings: [b][color=#00BF00]I can ping and access the VPN client (for example 10.8.7.178) from the local network (for example 192.168.100.7) without any problems.[/color] [color=#FF0000]However, I cannot access or ping any clients in the local network (for example 192.168.100.7) from the VPN client.[/color][/b] So I was guessing something is wrong with my iptables settings and the server doesn't forward the packets coming FROM the VPN clients TO the local network correctly. After searching for a while I came across these iptables settings and tried them: [code]iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -A FORWARD -i eth0 -o tun0 -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -i tun0 -o eth0 -j ACCEPT[/code] Now, to my surprise, everything works well. I'm having trouble understanding why exactly the first set of rules, which are listed on openVPN's website for exactly my configuration ([i]"Using routing and OpenVPN not running on the default gateway"[/i]) do not work in my case. Is there anything I can change with my iptables settings? Is it a good idea to use MASQUERADE with my setup? (server behind router) Thanks in advance!

Problem with iptables behind router

eirin

Hello everyone!

I'm in the process of setting up an OpenVPN network for my home use.
The OpenVPN server (running on Debian) is behind a router, on which I've configured a static route (10.8.7.0/24 -> 192.168.100.5) and opened the external port via port forwarding. I've also enabled IP forwarding on the OpenVPN server.

The server (192.168.100.5) I have configured with tun & topology subnet, by default the clients get an address in the 10.8.7.0/24 network.

dev tun
topology subnet
server 10.8.7.0 255.255.255.0
push "route 192.168.100.0 255.255.255.0"
[...]

Now I want my VPN clients to access the 192.168.100.0/24 network, so I'm pushing the route 192.168.100.0 255.255.255.0

From the Bridging & Routing website (https://community.openvpn.net/openvpn/wiki/BridgingAndRouting) I've taken these iptables rules:

  # Allow traffic initiated from VPN to access LAN
    iptables -I FORWARD -i tun0 -o eth0 -s 10.8.7.0/24 -d 192.168.100.0/24 -m conntrack --ctstate NEW -j ACCEPT

    # Allow established traffic to pass back and forth
    iptables -I FORWARD -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT

Now when using these settings:
I can ping and access the VPN client (for example 10.8.7.178) from the local network (for example 192.168.100.7) without any problems.
However, I cannot access or ping any clients in the local network (for example 192.168.100.7) from the VPN client.

So I was guessing something is wrong with my iptables settings and the server doesn't forward the packets coming FROM the VPN clients TO the local network correctly.

After searching for a while I came across these iptables settings and tried them:

iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
iptables -A FORWARD -i eth0 -o tun0 -m state --state RELATED,ESTABLISHED -j ACCEPT
iptables -A FORWARD -i tun0 -o eth0 -j ACCEPT

Now, to my surprise, everything works well. I'm having trouble understanding why exactly the first set of rules, which are listed on openVPN's website for exactly my configuration ("Using routing and OpenVPN not running on the default gateway") do not work in my case.

Is there anything I can change with my iptables settings? Is it a good idea to use MASQUERADE with my setup? (server behind router)

Thanks in advance!