I have an openvpn setup with one br0 and one tap0 interface. When viewing the interface activity in Firestarter as well as in iptraf, the tap0 shows no activity at all. is this normal? Also, our upload speeds are appalling all the sudden (0.1 Mbps on a 13Mbps network) but our download speeds are fine.
Our instances setup
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface for our internal network
auto br0
#iface eth1 inet dhcp
iface br0 inet static
address 172.20.20.1
netmask 255.255.255.0
gateway 172.20.20.1
bridge_ports eth0 tap0
# The primary network interface
auto eth1
iface eth1 inet static
address 172.20.21.2
netmask 255.255.255.0
gateway 172.20.21.3
mtu 9000
auto eth0
iface eth0 inet manual
up ip link set $IFACE up promisc on
down ip link set $IFACE down promisc off
