dotster I am working on setting up a demo system and want to use openvpn to connect the clients to the demo servers. I have a DD-WRT client to openvpn server in bridged mode. What I would like to be able to do is add additional clients and then bridge them to separate VLANs behind the server. So something like this with the same server and switch. client--DD-WRT1----Server--dot1q trunk---switch---VLAN1---Demo1 client--DD-WRT2----Server--dot1q trunk---switch---VLAN2---Demo2 The demo systems are identical, same address space, DHCP scopes, etc, and changing that is difficult. We are trying to visualize a system that was setup to work with the client plugged into the switch with the demo software and support lots of client (~50 remotes at a time). So what I need is for a DD-WRT router to auth to the server and all of its traffic to get bridged to a VLAN based off its credentials, is this possible? This needs to be in bridged mode so I dont have to change the IP addressing on the demo systems and the client behind the DD-WRT router can do DHCP to the demo system. If I do routed mode for the VPN and filter the clients I will have to rebuild the way the demo systems work and that is not trivial.
derdigge I did a similar setup in the past using openwrt. Maybe an option for your devices? http://wiki.openwrt.org/inbox/vpn.howto
