nutomg
Hello everyone.I would like to ask for help on fixing this problem, i use windows 8, connect through openvpn gui, everything is fine it gives me the ip, but when i try to browse it doesnt work, and after check the properties on the tap driver in control panel it shows that ipv4 and ipv6 has no network access.For vpn server i use centos 5.Here is the logs
port 1194 #- port
proto udp #- protocol
dev tun
tun-mtu 1500
tun-mtu-extra 32
mssfix 1450
reneg-sec 0
ca /etc/openvpn/easy-rsa/2.0/keys/ca.crt
cert /etc/openvpn/easy-rsa/2.0/keys/server.crt
key /etc/openvpn/easy-rsa/2.0/keys/server.key
dh /etc/openvpn/easy-rsa/2.0/keys/dh1024.pem
plugin /usr/share/openvpn/plugin/lib/openvpn-auth-pam.so /etc/pam.d/login #- Comment this line if you are using FreeRADIUS
#plugin /etc/openvpn/radiusplugin.so /etc/openvpn/radiusplugin.cnf #- Uncomment this line if you are using FreeRADIUS
client-cert-not-required
username-as-common-name
server 10.8.0.0 255.255.255.0
push "redirect-gateway def1"
push "dhcp-option DNS 8.8.8.8"
push "dhcp-option DNS 8.8.4.4"
keepalive 5 30
comp-lzo
persist-key
persist-tun
status 1194.log
verb 3
Ip tables
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 ACCEPT all -- any any anywhere anywhere state RELATED,ESTABLISHED
0 0 ACCEPT all -- any any 10.8.0.0/24 anywhere
0 0 REJECT all -- any any anywhere anywhere reject-with icmp-port-unreachable
0 0 ACCEPT all -- any any anywhere anywhere state RELATED,ESTABLISHED
0 0 ACCEPT all -- any any 10.8.0.0/24 anywhere
0 0 REJECT all -- any any anywhere anywhere reject-with icmp-port-unreachable
Chain OUTPUT (policy ACCEPT 22638 packets, 2873K bytes)
pkts bytes target prot opt in out source destination
Ip forwarding is enabled, i run the openvpn program on administrator.
