Hi All, when i use a profile to connect via a Windows Client i'm given an incorrect IP (within the correct range)
i'm given the IP 10.255.224.18, this conflicts with another IP on the network..
ifconfig-push 10.255.224.81 10.255.224.1
# cat client.conf
client
proto udp
dev tun
ca ca.crt
cert client.crt
key client.key
nobind
;user nobody
;group nobody
cipher AES-128-CBC
ns-cert-type server
comp-lzo
persist-key
persist-tun
verb 3
resolv-retry infinite
remote-random
# Connect to one of these servers.
remote vpn.*********.tv 1194
server 10.255.224.0 255.255.224.0
port 1194
proto udp
dev tun
ca server.d/ca.crt
cert server.d/server.crt
key server.d/server.key
dh server.d/dh2048.pem
crl-verify server.d/crl.pem
user nobody
group nobody
cipher AES-128-CBC
comp-lzo
keepalive 10 120
persist-key
persist-tun
log server.d/server.log
status server.d/server-status.log
verb 3
client-config-dir server.d/clients
client-to-client
# Allow direct access to these sites.
#
# Note that you should also add a corrisponding `iroute' option
# to the client configuration file.
# *********-i.tv
;route 10.0.0.0 255.255.224.0
;push "route 10.0.0.0 255.255.224.0"
# ********-i.tv
route 10.0.34.0 255.255.254.0
push "route 10.0.34.0 255.255.254.0"
# ********-i.tv
route 10.0.66.0 255.255.254.0"
push "route 10.0.66.0 255.255.254.0"
# *******-i.tv
route 10.0.98.0 255.255.254.0
push "route 10.0.98.0 255.255.254.0"
# *****-i.tv
;route 10.0.128.0 255.255.254.0
;push "route 10.0.128.0 255.255.254.0"
# *****-i.tv
;route 10.230.4.0 255.255.255.0
;push "route 10.230.4.0 255.255.255.0"
**********-i.tv:/etc/openvpn/
can you advise where i am going wrong?
