Set open vpn server and client version 2.3.2 32 bit

TerryAyala

hello to all the forum, this is my first post and I solicit your help, in the company I work have asked me to connect multiple branch headquarters, for that I have a 512 Kbps Turbonet 5Mb rise and fall with IP address 192.168 .1.1 255.255.255.0 mask, plus an ID with 1 mega public address mask 255.255.255.252 Gateway 201 247 144 168 201 247 144 170 in ascent and descent, routed to the internal ip 192.168.1.4 mask 255.255.255.0 in central offices, the branches will have Turbonet 3 megs down and mask set to 192.168.2.1 mask 255.255.255.0 192.168.3.1 255.255.255.0 first branch the second branch and so on, the data to be transferred are visual foxpro databases 9.00
I want to configure it when connected to my network segment assign the IP from 192.168.1.60 to 192.168.1.70 with mask 255.255.255.0 hambas formatted for viewing as pc's from the internal lan.
I managed to connect the server and the client, but not seen on the network so I can not make the customer ACCESS, to the application of visual foxpro, my both server and client configurations are: (This I have achieved by trial and error with several manuals on both linux and windows, for now I will put everything under windows environment and then the server will be Linux)

Server file

port 1194

proto udp

dev tap
;dev tun

dev-node TAP

ca ca.crt
cert openvpnsrv.crt
key openvpnsrv.key  # This file should be kept secret

dh dh1024.pem

;server 192.168.1.4 255.255.255.0

ifconfig-pool-persist ipp.txt

server-bridge 192.168.1.4 255.255.255.0 192.168.1.60 192.168.1.70

server-bridge

;push "route 192.168.1.1 255.255.255.0"
;push "route 192.168.20.0 255.255.255.0"

;client-config-dir ccd
route 192.168.1.4 255.255.255.0
;push "redirect-gateway"

;push "dhcp-option DNS 10.8.0.1"
;push "dhcp-option WINS 10.8.0.1"

;client-to-client

;duplicate-cn


keepalive 10 120

;tls-auth ta.key 0 # This file is secret

;cipher BF-CBC        # Blowfish (default)
;cipher AES-128-CBC   # AES
;cipher DES-EDE3-CBC  # Triple-DES

comp-lzo

max-clients 100

;user nobody
;group nobody

persist-key
persist-tun

status openvpn-status.log

;log         openvpn.log
;log-append  openvpn.log

verb 3

;mute 20

and on the client file

client

;dev tap
dev tun

;dev-node MyTap

;proto tcp
proto udp

;remote my-server-1 1194
;remote my-server-2 1194
;remote-random

resolv-retry infinite

nobind

;user nobody
;group nobody

persist-key
persist-tun

;http-proxy-retry # retry on connection failures
;http-proxy [proxy server] [proxy port #]

;mute-replay-warnings

ca ca.crt
cert client.crt
key client.key

ns-cert-type server

;tls-auth ta.key 1

;cipher x

comp-lzo

verb 3

;mute 20

dev tap
dev-node openVPN
remote xxx.xxx.xxx.xxx 1194 # Aqui pongo la Ip Publica y puerto
#Establecemos los parámetros de la PKI
ca ca.crt
cert chernandez.crt
key chernandez.key

TerryAyala

[Thanks for answering debbie10t as mentioned locally TurboNet am using with the ip 192.168.1.1 this is my gateway and pc with windows xp sp3 where I have installed the openvpn server is 192.168.1.4 with mask 255.255.255.0 hambas that is where I am doing tests.

I have in the Local Area Connection fixed ip 192.168.1.4 mask 255.255.255.0, gateway 192.168.1.1 in the TAP Connection automatically obtain an IP address on the bridge I establish the fixed ip 192.168.1.4 mask 255.255.255.0 gateway 192.168.1.1

Is this correct? or should to do otherwise

regards

Terry

P. D. If not too much trouble with the info you present as picture above code could you mention me to your discretion what would be the best if I have to dispose of it done so far, as I commented that this would be my first VPN and although I am newbie been reading a lot of tutorials.

TerryAyala

Debbie10t want to ask you a favor if you could tell me how to configure network cards (Lan Connection Server is 192.168.1.4 Mask 255.255.255.0 Gateway 192.168.1.1, Tap Connection should go fixed or dynamic and Connection bridge must be fixed or dynamic ) and settings have to be the server and the client to look at the network (Lan connection the client 192.168.2.4 Mask 255.255.255.0 Gateway 192.168.2.1, Tap connection should go fixed or dynamic and connection bridge must go fixed or dynamic)

Regards

TerryAyala

Debbie10t i was reading the information from the link and set the lan connections on the server, now I have discovered that the openvpn server not opening the port 1194, if I go to a website to scan the port, I get this closed, to verify close the openvpn server, and software ultravnc server mode, I put the port back to 1194 and port scan and I get open.

This verified that the router doing nat to the computer with the openvpn server.

Any suggestions?

regards

Terry