Howdy, I've successfully setup OpenVPN connect from my laptop to home.
Laptop: OpenVPN GUI v2. Assigned 192.168.66.6
Buffalo Router 192.168.11.1
dhcp 192.168.11.100-150, wifi, and ethernet connections
static ips:
file server: 192.168.11.50
printer: 192.168.11.51
additional router (no dhcp): 192.168.11.52
OpenVPN on router
Config via "Config File"
-=additional info in server=-
push "route 192.168.11.0 255.255.255.0"
push "dhcp-option DNS 192.168.66.1"
server 192.168.66.0 255.255.255.0
dev tun0
proto udp
keepalive 10 120
dh /tmp/openvpn/dh.pem
ca /tmp/openvpn/ca.crt
cert /tmp/openvpn/cert.pem
key /tmp/openvpn/key.pem
# Only use crl-verify if you are using the revoke list - otherwise leave it commented out
# crl-verify /tmp/openvpn/ca.crl
# management parameter allows DD-WRT's OpenVPN Status web page to access the server's management port
# port must be 5001 for scripts embedded in firmware to work
management localhost 5001
I'm not going to be transferring large files through the VPN, but I want to be able to browse local folder shares on my home network. I suspect the IP's are too different to make the file shares show up. To change that, do I modify those three parts:
push "route 192.168.11.0 255.255.255.0"
push "dhcp-option DNS 192.168.66.1"
server 192.168.66.0 255.255.255.0
to something else?
Thanks!
