Hey all,
Before I dive right into this I think it would be best if I described my network setup and what I am trying to accomplished.
Right now I am running a openvpn client on my router with a tunnel to my provider as my default and it spilts it out my home outside connection if I need to access a website with a american IP address.
So far it has been great, however I am now trying incorporate a access server into my setup while I am running the tunnel. I know I didn't mess up on the NAT or iptables rules since when the tunnel is down it works, however when the tunnel is up it does not work. I also want to point out I have classified the return traffic of the access-server with a fwmark and referred it to a route table that is exactly the same before the tunnel is started.
So the issue I am having is when the traffic is generated I am able to see the traffic on the outside interface (home) via tcpdump however on the inside interface tcpdump does not show any connection attempts. So I think I have something in the config that is dropping the traffic.
client
dev tun0
route-nopull
proto udp
remote pw.openvpn.ipredator.se 1194
resolv-retry infinite
nobind
auth-user-pass /etc/openvpn/IPredator.auth
auth-retry nointeract
ca [inline]
tls-client
tls-auth [inline]
ns-cert-type server
keepalive 10 30
cipher AES-256-CBC
persist-key
persist-tun
comp-lzo
tun-mtu 1500
mssfix
passtos
verb 3
route pw.openvpn.ipredator.se net_gateway
redirect-gateway def1
topology subnet
dhcp-option DOMAIN ipredator.se
dhcp-option DNS 46.246.46.46
dhcp-option DNS 194.132.32.23
#Google IP-range
route 64.233.160.0 255.255.224.0 net_gateway
route 66.102.0.0 255.255.240.0 net_gateway
route 66.249.64.0 255.255.224.0 net_gateway
route 72.14.192.0 255.255.192.0 net_gateway
Any help would be great
