I set server on Debian, with config file below :
port 443
management 127.0.0.1 443
proto udp
dev tun
ca ca.crt
cert server.crt
key server.key # This file should be kept secret
dh dh1024.pem
server 10.8.0.0 255.255.255.0
push "redirect-gateway def1 bypass-dhcp"
push "dhcp-option DNS 129.250.35.250"
push "dhcp-option DNS 74.82.42.42"
tls-auth ta.key 0 # This file is secret
script-security 2
verb 3
keepalive 10 60
comp-lzo
persist-key
persist-tun
status openvpn-status.log
log-append openvpn.log
verb 3
And I also set up my client with this config file.
##############################################
# Sample client-side OpenVPN 2.0 config file #
# for connecting to multi-client server. #
# #
# This configuration can be used by multiple #
# clients, however each client should have #
# its own cert and key files. #
# #
# On Windows, you might want to rename this #
# file so it has a .ovpn extension #
##############################################
# Specify that we are a client and that we
# will be pulling certain config file directives
# from the server.
client
# Use the same setting as you are using on
# the server.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun
# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel
# if you have more than one. On XP SP2,
# you may need to disable the firewall
# for the TAP adapter.
;dev-node MyTap
# Are we connecting to a TCP or
# UDP server? Use the same setting as
# on the server.
;proto tcp
proto udp
# The hostname/IP and port of the server.
# You can have multiple remote entries
# to load balance between the servers.
remote 162.211.64.107 443
;remote my-server-2 1194
# Choose a random host from the remote
# list for load-balancing. Otherwise
# try hosts in the order specified.
;remote-random
# Keep trying indefinitely to resolve the
# host name of the OpenVPN server. Very useful
# on machines which are not permanently connected
# to the internet such as laptops.
resolv-retry infinite
# Most clients don't need to bind to
# a specific local port number.
nobind
# Downgrade privileges after initialization (non-Windows only)
;user nobody
;group nogroup
# Try to preserve some state across restarts.
persist-key
persist-tun
# If you are connecting through an
# HTTP proxy to reach the actual OpenVPN
# server, put the proxy server/IP and
# port number here. See the man page
# if your proxy server requires
# authentication.
;http-proxy-retry # retry on connection failures
;http-proxy [proxy server] [proxy port #]
# Wireless networks often produce a lot
# of duplicate packets. Set this flag
# to silence duplicate packet warnings.
;mute-replay-warnings
# SSL/TLS parms.
# See the server config file for more
# description. It's best to use
# a separate .crt/.key file pair
# for each client. A single ca
# file can be used for all clients.
ca ca.crt
cert sookcha.crt
key sookcha.key
# Verify server certificate by checking
# that the certicate has the nsCertType
# field set to "server". This is an
# important precaution to protect against
# a potential attack discussed here:
# http://openvpn.net/howto.html#mitm
#
# To use this feature, you will need to generate
# your server certificates with the nsCertType
# field set to "server". The build-key-server
# script in the easy-rsa folder will do this.
ns-cert-type server
# If a tls-auth key is used on the server
# then every client must also have the key.
tls-auth ta.key 1
# Select a cryptographic cipher.
# If the cipher option is used on the server
# then you must also specify it here.
;cipher x
# Enable compression on the VPN link.
# Don't enable this unless it is also
# enabled in the server config file.
comp-lzo
# Set log file verbosity.
verb 3
# Silence repeating messages
;mute 20
But, when I connect to OpenVPN server(port 443), I got the TLS Error.
Here is my client error log.
Jul 09 16:57:59: UDPv4 link remote: [AF_INET]IP:443
Jul 09 16:58:59: TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
Jul 09 16:58:59: TLS Error: TLS handshake failed
Jul 09 16:58:59: SIGUSR1[soft,tls-error] received, process restarting
And here is my server log
Tue Jul 9 03:57:11 2013 OpenVPN 2.1.3 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Feb 20 2012
Tue Jul 9 03:57:11 2013 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:443
Tue Jul 9 03:57:11 2013 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Tue Jul 9 03:57:11 2013 Diffie-Hellman initialized with 1024 bit key
Tue Jul 9 03:57:11 2013 /usr/bin/openssl-vulnkey -q -b 1024 -m <modulus omitted>
Tue Jul 9 03:57:12 2013 Control Channel Authentication: using 'ta.key' as a OpenVPN static key file
Tue Jul 9 03:57:12 2013 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Tue Jul 9 03:57:12 2013 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Tue Jul 9 03:57:12 2013 TLS-Auth MTU parms [ L:1542 D:166 EF:66 EB:0 ET:0 EL:0 ]
Tue Jul 9 03:57:12 2013 Socket Buffers: R=[245760->131072] S=[245760->131072]
Tue Jul 9 03:57:12 2013 ROUTE: default_gateway=UNDEF
Tue Jul 9 03:57:12 2013 TUN/TAP device tun0 opened
Tue Jul 9 03:57:12 2013 TUN/TAP TX queue length set to 100
Tue Jul 9 03:57:12 2013 /sbin/ifconfig tun0 10.8.0.1 pointopoint 10.8.0.2 mtu 1500
Tue Jul 9 03:57:12 2013 /sbin/route add -net 10.8.0.0 netmask 255.255.255.0 gw 10.8.0.2
Tue Jul 9 03:57:12 2013 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Tue Jul 9 03:57:12 2013 UDPv4 link local (bound): [undef]
Tue Jul 9 03:57:12 2013 UDPv4 link remote: [undef]
Tue Jul 9 03:57:12 2013 MULTI: multi_init called, r=256 v=256
Tue Jul 9 03:57:12 2013 IFCONFIG POOL: base=10.8.0.4 size=62
Tue Jul 9 03:57:12 2013 Initialization Sequence Completed
What is wrong with my configuration?
