Job314
Hi,
I've a question:
My goal is create a OpenVPN Server (RT-N66U with merlin firmware 3.0.0.4.270.26) between a clients (RT-N16 with tomato firmware 1.28 and it's LAN).
The connection is perfectly working, because from any PC on lan of RT-N16 , i can access to share of pc in RT-N66U LAN and ping anything.
From any PC on LAN of OpenVPN server It's IMPOSSIBLE ping and able access to shares of RT-N16 and any PC.
Can you help me?
Server Side:
RT-N66U with HDD connected on USB: 131.114.0.1 255.255.255.0
OpenVPN Server: 10.8.0.1
PC: 131.114.0.19
RT-N16 with HDD connected on USB: 192.168.0.1 255.255.255.0
OpenVPN Client: 10.8.0.6
PC: 192.168.0.19
From 192.168.0.19 I'm able to ping and access to 131.114.0.1 HDD and 131.114.0.19 shares
From 131.114.0.19 it's impossible ping and access to 192.168.0.1 HDD or 192.168.0.19 shares
It's possibile only ping to 10.8.0.6 but not have access to HDD or pc Shares
Firewall disabled but no work.
Route tables RT-N66U:
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.205.1 * 255.255.255.255 UH 0 0 0 eth0
10.8.0.2 * 255.255.255.255 UH 0 0 0 tun21
131.114.0.0 * 255.255.255.0 U 0 0 0 br0
10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun21
192.168.0.0 10.8.0.1 255.255.255.0 UG 0 0 0 tun21
192.168.205.0 * 255.255.255.0 U 0 0 0 eth0
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
default 192.168.205.1 0.0.0.0 UG 0 0 0 eth0
The route 192.168.0.0, 10.8.0.1, 255.255.255.0 tun21 is added by me manually.
RT-N16 Route Tables:
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
10.8.0.5 * 255.255.255.255 UH 0 0 0 tun11
192.168.1.1 * 255.255.255.255 UH 0 0 0 vlan2
131.114.0.0 10.8.0.5 255.255.255.0 UG 0 0 0 tun11
10.8.0.0 10.8.0.5 255.255.255.0 UG 0 0 0 tun11
192.168.1.0 * 255.255.255.0 U 0 0 0 vlan2
192.168.0.0 * 255.255.255.0 U 0 0 0 br0
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
default 192.168.1.1 0.0.0.0 UG 0 0 0 vlan2
Any ideas?
