kamranss_20
Dear All,
I have WANShield firewall, through that I configure Open VPN, it configured fine and working for all the user and PC.
But on one PC it's not getting connected, I tried by reinstall the OpenVPN Client still the same issue. I recently install the new windows and install open VPN it's works once then from today not working. It's giving me the following errors:
TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
TLS handshake failed
This is only in one PC not user, if I use another PC with same user ID it will connect successfully.
What will be the issue?
janjust
in 99% of the cases a misconfigured local firewall or router; also, some switches do not properly forward UDP traffic, if that's what you're using.
Jruuu
If you are using the tls-auth option, verify that the client and server have this directive in their config files and have the ***SAME*** key file.
***IF you have stated a direction with this directive (a number after 'tls-auth keyfile') on the server (example: tls-auth static.key 1), make sure the client has the opposite number in the client configuration file (tls-auth static.key 0).
kamranss_20
Hi janjust,
you are right, it was the internal issue of network that not allowing. As it was different organization network. They have few restrictions to the IP's (that I came to know today).
Now it's working.
Thanks for reply both.
