mirvine33
Hi I am new to the forum. Sorry if this has come up many times. I have not found a solution. My basic openvpn system works except for the routing. I will try to explain briefly my setup and what I would like to do. I have tried using Jan Keijser's book which is great but I can't get everything to work.
Firstly I have an openvpn server on a class C network lets say 137.101.96.0. All machines behind this have routable IP numbers behind a firewall so only those with entry ports open can receive outside demands. My server is for example on 137.101.96.34 I have a client behind a router 3G ( private ip on the internet and private ip on the internal network so lots of nat I suppose) with a non routable network IP 192.168.4.0 I want to access machines on this network from my server or from machines on the 137.101.96.0 network. Here is a diagram
server 3G clientvpn instrument
137.101.96.34 ==> 192.168.4.6 ==> 192.168.4.10
10.8.0.1(vpn) 10.8.0.6(vpn)
So from .34 I would like to access .10 and eventually also in the other direction .10 to .34
Now for my network
I setup a link between .34 and .6(client) I can ping the 10.8.0.1 from the .6 and the inverse
However when I use the push command P42 of the cookbook the ping no longer works. I have never seen route examples with routable ip numbers (and there probably is a good reason).
Any help would be appreciated. Note the most important is to use the machines on the client network at least from the server.
Many thanks
Mark
