router dsr-250n|ping from router ok but not from my computer

cliclem

Hello everyone, I bought a router dsr-250 from dlink and I try to use openvpn as a client.

I have 3 servers on my remote vpn and 5 computers on my local network. My wan network is 192.168.0.0 (adsl modem 192.168.1.1) , my lan network is 192.168.1.0 and my remote network is 10.8.0.0.
I succeded to configure the router for openvpn: from the router ping utility I can reach remote servers (10.8.0.1, 10.8.0.20 ...), but from the local network (192.168.1.10 for exemple) it's not possible :/

What is wrong ? do I have to configure a vlan, put some rules on the firewall, I 'm not admin-sys ... so please be tolerent with me 🙂
It make me really upset because I'm sure to be really close to the point, and for now every morning I have to start openvpn on my computer and my co-worker have to do so ... and when for example I use a vmware ubuntu to access nfs, if I start openvpn after the v.m. I have to force unmount and then remount devices, so it's not great

please help ...

[deleted]

Please paste configs (w/comments removed) and logs! And any special network considerations we may need

cliclem

here is my iptable, my question is why can't I access to 10.8.0.0 from 192.168.1.102 for example ? Thanks

Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.8.0.13 0.0.0.0 255.255.255.255 UH 0 0 0 tun1
10.8.0.0 10.8.0.13 255.255.255.0 UG 0 0 0 tun1
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 bdg1
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 192.168.0.254 0.0.0.0 UG 0 0 0 eth1
--------------------------

cliclem

From tools->system check->ping I have:

PING 10.8.0.1 (10.8.0.1): 56 data bytes
64 bytes from 10.8.0.1: seq=0 ttl=64 time=70.684 ms
64 bytes from 10.8.0.1: seq=1 ttl=64 time=65.214 ms
64 bytes from 10.8.0.1: seq=2 ttl=64 time=110.588 ms
64 bytes from 10.8.0.1: seq=3 ttl=64 time=89.294 ms
64 bytes from 10.8.0.1: seq=4 ttl=64 time=38.522 ms

--- 10.8.0.1 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 38.522/74.860/110.588 ms

cliclem

No one has an idea ? :cry:

ekurelowech

your subnet mask has to be 255.255.0.0 to see those IP numbers