sebastien_be
Hi All,
I have been reading a lot of tutorials and documents but it still remains very challenging and difficult to me to make my first openvpn working on Raspberry PI (Wheezy).
Please find here below the stephs I have been following:
Get OpenVPN: “sudo apt-get install openvpn”
Get bridge-utils: “sudo apt-get install bridge-utils”
Generate the static Key: “openvpn --genkey --secret static.key
Create the server.conf file: sudo nano /etc/openvpn/server.conf
dev tun
ifconfig 10.8.0.1 10.8.0.2
secret /home/myuser/static.key
Start the openvpn server: sudo openvpn –-config /etc/openvpn/server.conf --log /etc/openvpn/server.log
I then installed on my android phone OpenVPN Connect from OpenVPN (please let me know if I’m using the wrong one since there are a lot of apps with openvpn: “openvpn for android”, “openvpn installer”, openvpn settings”). I copied from my RPi the static.key I renamed “static.ovpn”. I imported it on my android phone but I then have the following error message: “Error parsing OpenVPN profile : static.ovpn : option_error: remote option not specified.
Can you please let me know what I did wrong or forgot to do right?
Thanks,
xx.
