Hi
I have set up few penvpn servers before but i used dev tun
Now my router doesn't support 'tun' so i am trying to set up a dev tap server.
I have set up the server using this config
port 9201
proto udp
dev tap
ca /etc/openvpn/easy-rsa/keys/ca.crt
cert /etc/openvpn/easy-rsa/keys/server.crt
key /etc/openvpn/easy-rsa/keys/server.key # This file should be kept secret
dh /etc/openvpn/easy-rsa/keys/dh1024.pem
ifconfig-pool-persist ipp.txt
server-bridge 10.8.0.1 255.255.255.0 10.8.0.100 10.8.0.200
push "route 192.168.100.0 255.255.255.0"
keepalive 10 120
comp-lzo
push "redirect-gateway def1"
persist-key
persist-tun
status /etc/openvpn/log/status.log
log /etc/openvpn/log/openvpn.log
log-append /etc/openvpn/log/openvpn.log
verb 3
ifconfig-noexec
and the client is using this config
client
dev tap
proto udp
# change to your vpn server
remote 199.229.255.71 9201
resolv-retry infinite
nobind
persist-key
persist-tun
ca ca.crt
cert client1.crt
key client1.key
ns-cert-type server
comp-lzo
verb 3
redirect-gateway def1
It connects successfully but doesn't route the traffic via it.
i checked this by using ip2location.com , it shows me my default ip address , not that of the server
Please help me
Sorry for my bad english
