everest12
Sorry, we encountered an error while displaying this content. If you're a user, please try again later. If you're an administrator, take a look in your Flarum log files for more information.
everest12
I thought I would give a update on this. I used Wireshark to look at the traffic and interestingly when I ping other devices including the OpenVPN VM The ICMP requests show up but not the ones to the W2008 VM.
Also, periodically I see this:
Pinging SEP.domain.local [10.0.0.124] with 32 bytes of data:
Reply from 10.0.0.124: bytes=32 time=1841ms TTL=128
Reply from 10.0.0.124: bytes=32 time=69ms TTL=128
Reply from 10.0.0.124: bytes=32 time=78ms TTL=128
Reply from 10.0.0.124: bytes=32 time=70ms TTL=128
Ping statistics for 10.0.0.124:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 69ms, Maximum = 1841ms, Average = 514ms
C:\Users\User>ping SEP
Pinging sep.domain.local [10.0.0.124] with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 10.0.0.124:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss)
everest12
After further head banging I did a tcpdump and noticed that ICMP requests from the client connection (10.0.0.116/24) traversing the bridge were being broadcast to 10.0.0.1 (router) to provide the location of the file server (10.0.0.124/24).
So, my question is...what is the best way to add the route back to the OpenVPN AS? I tried to add a static route in the router but of course the static route destination and gateway cannot be on the same subnet.
