Hello, I set up an OpenVPN server in bridge mode with a server-bridge directive so that OpenVPN assigns an IP in the range 10.0.0.240-249. The problem is that when I connect from a Mac with Tunnelblick, I get 2 IP addresses, one from the server-bridge pool and one from the DHCP server running in the 10.0.0.0/24 subnet: tap0: flags=8843 mtu 1500 ether 42:a7:d2:73:e6:35 inet 10.0.0.240 netmask 0xffffff00 broadcast 10.0.0.255 inet 10.0.0.123 netmask 0xffffff00 broadcast 10.0.0.255 From another host in the subnet 10.0.0.0/24, I can ping both 10.0.0.240 and 10.0.0.123. Do you also encounter the same issue? Is there a way around it? Best Regards, Raphael

Bridge mode: Mac gets 2 IP addresses (server-bridge + DHCP)

rbenedet

Hello,

I set up an OpenVPN server in bridge mode with a server-bridge directive so that OpenVPN assigns an IP in the range 10.0.0.240-249. The problem is that when I connect from a Mac with Tunnelblick, I get 2 IP addresses, one from the server-bridge pool and one from the DHCP server running in the 10.0.0.0/24 subnet:
tap0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 42:a7:d2:73:e6:35
inet 10.0.0.240 netmask 0xffffff00 broadcast 10.0.0.255
inet 10.0.0.123 netmask 0xffffff00 broadcast 10.0.0.255

From another host in the subnet 10.0.0.0/24, I can ping both 10.0.0.240 and 10.0.0.123.

Do you also encounter the same issue? Is there a way around it?

Best Regards,
Raphael