Hi all, I've visited a lot of website but now I have about 10 config scripts and unfortunately, none work.
As I'm not sure about scripting and networking beginner, I've done a little schematic.
http://sierragolf3.free.fr/exvpn.png
Server : 80.11.xx.xx:5001
T2, T3 and T4 are directly connected to an ADSL Router.
Each is configured with this logic : 192.168.1.xx with 192.168.1.1 as Gateway and DNS
In other hand, a Tap connection exist with a DHCP configuration.
The goal is to have only one network. However, the T2, T3 and T4 must have internet.
Below, my best script at this time.
Client :
dev tap
proto udp
remote 80.11.xx.xx 5001
resolv-retry infinite
nobind
secret key.txt
comp-lzo
verb 4
mute 10
Server :
dev tap
proto udp
port 5001
keepalive 10 120
secret key.txt
comp-lzo
verb 4
mute 10
With these scripts and a bridged connection on my server, I had internet and a signal "connected". But no traffic.
All Windows (XP / Seven)
Don't want any security, useless.
Some website have shorter or longer scripts... I'm lost.
Sorry for my english (I'm just French) and thank you !
