marc_all
Hello,
I have just upgraded my server (2008R2) into a new 2012 Server (with the RTM version it is the upgrade option from the CD installation, so all the parameters are kept).
The server was working fine after the installation but after the upgrade, OpenVPN didn't work. I saw that I had to rename the network card created by OpenVPN) before i was able to make open VPN Server work again. After that, I saw that it was not possible anymore to connect from a workstation into another computer on the network. I have no idea about what is wrong.
Can you plerase help me ?
Here is my configuration :
The OpenVPN Server IP
(internal) 192.168.123.30 mask 255.255.255.0
(external) xxxxxxxx port 1194
I can only ping the 10.8.0.1 IP adress. 192.168.123.30 doesn't work and any other address doesn't work too.
The route in the router has the 10.8.0.0 mask 255.255.255.0 that points to 192.168.123.30 (like before).
Thank you
Marc
Mimiko
If this is production server, then do not update. Windows 2012 is not out for regular use. There is no testing or feedbacks for compatibility with OpenVPN. You are on your own to find the problem.
marc_all
Hello,
The connection is working but the routing doesn't : I have only access to the server with the address 10.8.0.1 not to the network.
The registry parameter is correct. I will try to install a completely new version (no upgrade) and see if it is ok or not (and keep you informed).
Marc
marc_all
Hello,
I have made some tests with a new 2012 server with openvpn and hyper-v running and there is no problem.
After that I have removed openvpn and the hyper-v role from the non working server and installed the roles and openvpn again (first hyper-v and after that openvpn).
When I have done that all was working fine.
After that I have tried to share the port 5060 so I can voip from home to the network (and the problem appeared again. Removing the sharing didn't help at all. Only removing openvpn and hyper-v solves the problem. As soon as the sharing is enabled you can't use openvpn to see another computer. Only 10.8.0.1 is working.
It seems to me that is is the only problem
Thank you for your time. I hope it will help someone that has the problem.
Marc
