Hey,
I just installed OpenVPN. Server-side on win 2003 SBS (no bridge possible), and for now just one client under Win7 PRO x86.
All is fine except that i can't ping client from server. However i can ping server with both ovpn IP and local IP.
For now i just made test in local mode.
My goal is to permit mobiles users to access server and machines behind it, from anywhere. It's not really a matter if i can't ping clients... but it should work, no? 😃
The LAN is 192.168.10.0/255 where the server is 192.168.10.253 and gateway is 192.168.10.100
Ovpn subnet is as default 10.8.0.0/24
Here's the client config:
client
dev tun
;dev tap
proto udp
;##FOR TEST###
remote 192.168.10.253 1194
;############
resolv-retry infinite
nobind
persist-key
persist-tun
ca ca.crt
cert client1.crt
key client1.key
tls-auth ta.key 1
cipher AES-128-CBC
comp-lzo
verb 3
#ns-cert-type server
route-method exe
route-delay 2
dev-node OpenVPN
dhcp-option DNS 192.168.10.100
pull
server config:
port 1194
proto udp
;dev tap
dev tun
dev-node OpenVPN
ca ca.crt
cert server.crt
key server.key
dh dh4096.pem
server 10.8.0.0 255.255.255.0
ifconfig-pool-persist ipp.txt
push "dhcp-option DNS 10.8.0.1"
keepalive 10 120
tls-auth ta.key 0
cipher AES-128-CBC
comp-lzo
max-clients 20
persist-key
persist-tun
status openvpn-status.log
verb 3
route-method exe
route-delay 2
;i tried with those 2 lines, but i cannot ping server anymore.
;push "route 192.168.10.0 255.255.255.0"
;push "redirect-gateway def1"
I forwarded port like that:
And i also tried to route like that (Is it the ggod way?), of course i tried to uncomment the last two lines of server conf..., tried to disable router's firewal, ....
What did i make wrong?
Hope you 'll can help 🙂
Thanks
