Hello world.
I'm usin tap but i have duplicate networks.
Office #1 LAN: 192.168.10.0/24
Office #2 LAN 192.168.10.0/24
OpenVPN Network 10.8.8.0/24
The route to network 192.168.10.0 is duplicate, so... in the routing table... how the Linux will differ each other if they are equal?
[root@private ~]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 98.158.186.1 0.0.0.0 UG 0 0 0 eth0
98.158.186.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0
172.16.2.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0
192.168.10.0 172.16.2.2 255.255.255.0 UG 0 0 0 tap0
192.168.10.0 172.16.2.3 255.255.255.0 UG 0 0 0 tap0
[root@private ~]#
How can i fix that using tap?
