Hi.
I'm using tap0
This is the scenario:
Dedicated server ip: 12.34.56.78 (SERVER)
OpenVPN Network is: 10.8.8.0 255.255.255.0
Tap0 server ip is: 10.8.8.1
Office#1 connect to SERVER at 12.34.56.78
Office eth0 ip: 192.168.10.86 255.255.255.0
LAN office Network is: 192.168.10.0 255.255.255.0
Tap0 client ip is: 10.8.8.2 255.255.255.0
===============
In the server, i add manually the network 192.168.10.0 via 10.8.8.1
Because i want to be able to ping hosts located in the Office#1 network.
So, in the SERVER, i run this in terminal:
route add -net 192.168.10.0 netmask 255.255.255.0 gw 10.8.8.1
If i ping the office openvpn client connected to SERVER.
I get this:
PING 192.168.10.86 (192.168.10.86) 56(84) bytes of data.
64 bytes from 192.168.10.86: icmp_req=1 ttl=64 time=368 ms
64 bytes from 192.168.10.86: icmp_req=2 ttl=64 time=184 ms
64 bytes from 192.168.10.86: icmp_req=3 ttl=64 time=181 ms
But, if i ping another host in the office#1 LAN, the ping fails. It says:
PING 192.168.10.1 (192.168.10.1) 56(84) bytes of data.
From 192.168.118.1 icmp_seq=2 Destination Host Unreachable
From 192.168.118.1 icmp_seq=3 Destination Host Unreachable
From 192.168.118.1 icmp_seq=4 Destination Host Unreachable
In SERVER and in the client, i disabled the iptables firewall:
service iptables stop
Please, tell me what can i do
