Thank you for the helpful discussion.
In case another user stumbles upon this thread trying to solve the same problem - Error 1450, insufficient resources - I found a different workaround that will let you install the driver.
Disclaimer: This is probably not the best/smartest way to do this, but it is very simple.
Instead of installing the drives as an ifType(other), install it as another ifType,
e.g. ifType(ethernet). To do this is fairly simple and only requires adding one line to your
inf file.
- -Open your OemWin2k.inf or OemWin2k_1.inf (32-bit) file in a text editor.
-Add the line "*IfType = 6" to the driver section of the file.
-Save.
Your new
inf file should look like:
;---------------------------------------------------------------
; Driver Section (Done)
;---------------------------------------------------------------
;----------------- Characteristics ------------
; NCF_PHYSICAL = 0x04
; NCF_VIRTUAL = 0x01
; NCF_SOFTWARE_ENUMERATED = 0x02
; NCF_HIDDEN = 0x08
; NCF_NO_SERVICE = 0x10
; NCF_HAS_UI = 0x80
;----------------- Characteristics ------------
[tap0901.ndi]
*IfType = 6; IF_TYPE_ETHERNET_CSMACD
CopyFiles = tap0901.driver, tap0901.files
AddReg = tap0901.reg
AddReg = tap0901.params.reg
Characteristics = 0x81
[tap0901.ndi.Services]
AddService = tap0901, 2, tap0901.service
[tap0901.reg]
HKR, Ndi, Service, 0, "tap0901"
HKR, Ndi\Interfaces, UpperRange, 0, "ndis5"
HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
HKR, , Manufacturer, 0, "%Provider%"
HKR, , ProductName, 0, "%DeviceDescription%"
[tap0901.params.reg]
HKR, Ndi\params\MTU, ParamDesc, 0, "MTU"
HKR, Ndi\params\MTU, Type, 0, "int"
HKR, Ndi\params\MTU, Default, 0, "1500"
HKR, Ndi\params\MTU, Optional, 0, "0"
HKR, Ndi\params\MTU, Min, 0, "100"
HKR, Ndi\params\MTU, Max, 0, "1500"
HKR, Ndi\params\MTU, Step, 0, "1"
HKR, Ndi\params\MediaStatus, ParamDesc, 0, "Media Status"
HKR, Ndi\params\MediaStatus, Type, 0, "enum"
HKR, Ndi\params\MediaStatus, Default, 0, "0"
HKR, Ndi\params\MediaStatus, Optional, 0, "0"
HKR, Ndi\params\MediaStatus\enum, "0", 0, "Application Controlled"
HKR, Ndi\params\MediaStatus\enum, "1", 0, "Always Connected"
HKR, Ndi\params\MAC, ParamDesc, 0, "MAC Address"
HKR, Ndi\params\MAC, Type, 0, "edit"
HKR, Ndi\params\MAC, Optional, 0, "1"
HKR, Ndi\params\AllowNonAdmin, ParamDesc, 0, "Non-Admin Access"
HKR, Ndi\params\AllowNonAdmin, Type, 0, "enum"
HKR, Ndi\params\AllowNonAdmin, Default, 0, "1"
HKR, Ndi\params\AllowNonAdmin, Optional, 0, "0"
HKR, Ndi\params\AllowNonAdmin\enum, "0", 0, "Not Allowed"
HKR, Ndi\params\AllowNonAdmin\enum, "1", 0, "Allowed"
After this you should be able to install the driver with
devcon.exe, or the installer, without any issues. Hopefully this helps the next person who runs into this problem.
