Server to client network access between two tomatousb routers
Posted: Wed Nov 16, 2016 9:58 pm
Hi
I have been testing and googling and I am not able to find the problem.
I have two networks, both routers run Tomatousb Shibby
Client router 192.168.10.0 / 10.8.0.2
Server router 192.168.20.0 / 10.8.0.1
I am able to access everything as normal from client netwrok to server network. But from server network I can only ping/trace the client router.
When I run traceroute from the server router to an ip adress ex 192.168.10.110 only hop 1 shows 10.8.0.2 and then the list is empty.
I get that I probably need some firewall rules or some routing parameters on the client side.
Could some one please help me out?
Server config:
Client:
Edit: Some clarifications
I have been testing and googling and I am not able to find the problem.
I have two networks, both routers run Tomatousb Shibby
Client router 192.168.10.0 / 10.8.0.2
Server router 192.168.20.0 / 10.8.0.1
I am able to access everything as normal from client netwrok to server network. But from server network I can only ping/trace the client router.
When I run traceroute from the server router to an ip adress ex 192.168.10.110 only hop 1 shows 10.8.0.2 and then the list is empty.
I get that I probably need some firewall rules or some routing parameters on the client side.
Could some one please help me out?
Server config:
Code: Select all
daemon
ifconfig 10.8.0.1 10.8.0.2
proto tcp-server
port 1194
dev tun21
comp-lzo adaptive
keepalive 15 60
verb 3
secret static.key
status-version 2
status status
# Custom Configuration
script-security 2
route-up "/sbin/route add -net 192.168.10.0 netmask 255.255.255.0 gw 10.8.0.2"
Code: Select all
# Automatically generated configuration
daemon
dev tun11
proto tcp-client
remote xx.xxx.xx.xx 1194
ifconfig 10.8.0.2 10.8.0.1
resolv-retry 30
nobind
persist-key
persist-tun
comp-lzo adaptive
verb 3
secret static.key
status-version 2
status status
# Custom Configuration
route 192.168.20.0 255.255.255.0 10.8.0.1