Hi
The routing table posted above is from the routers.
I am able to ping between the routers both ways. And I am able to ping from a computer on the client side but not from the router on the server side to a computer on the client side.
I have done several traceroute tests and from what I can see the different devices on the server side knows where to route the ip adress to as a traceroute to the route succeedes but when I want to go past the client router it fails.
The routers routing tables are in the post above.
Failed tests in red
Tracert from compuiter on client side to NAS on server side
Code: Select all
Tracing route to NAS2 [192.168.20.11]
over a maximum of 30 hops:
1 1 ms 1 ms <1 ms Christoffer.Christoffer [192.168.10.1]
2 30 ms 30 ms 30 ms 10.8.0.1
3 30 ms 289 ms 30 ms NAS2 [192.168.20.11]
Trace complete.
Tracert from router on server side to computer on client side
Code: Select all
Hop Address Min (ms) Max (ms) Avg (ms) +/- (ms)
1 10.8.0.2 27.47 27.56 27.51
2 *
3 *
4 *
5 *
6 *
7 *
8 *
9 *
10 *
[/color]
Server router to client router
Code: Select all
Hop Address Min (ms) Max (ms) Avg (ms) +/- (ms)
1 192.168.10.1 28.12 31.13 29.49
Client router to server router
Code: Select all
Hop Address Min (ms) Max (ms) Avg (ms) +/- (ms)
1 192.168.20.1 27.26 33.29 29.81
NAS on server side to computer on client side
Code: Select all
NAS3:/etc/iproute2# traceroute 192.168.10.110
traceroute to 192.168.10.110 (192.168.10.110), 30 hops max, 60 byte packets
1 89router.89 (192.168.20.1) 0.292 ms 0.792 ms 0.753 ms
2 10.8.0.2 (10.8.0.2) 36.651 ms 110.803 ms 111.316 ms
3 * * *
4 * * *
5 * * *
[/color]
NAS on router side to router on client side
Code: Select all
traceroute to 192.168.10.1 (192.168.10.1), 30 hops max, 60 byte packets
1 89router.89 (192.168.20.1) 0.323 ms 0.825 ms 0.786 ms
2 192.168.10.1 (192.168.10.1) 35.826 ms 98.077 ms 98.578 ms
NAS3 Routing table, server side
Code: Select all
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default 89router.89 0.0.0.0 UG 0 0 0 eth0
10.8.0.1 * 255.255.255.255 UH 0 0 0 tun0
link-local * 255.255.0.0 U 1000 0 0 eth0
192.168.10.0 89router.89 255.255.255.0 UG 0 0 0 eth0
192.168.20.0 * 255.255.255.0 U 0 0 0 eth0
Computer on client side routing table
Code: Select all
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.10.1 192.168.10.110 40
127.0.0.0 255.0.0.0 On-link 127.0.0.1 331
127.0.0.1 255.255.255.255 On-link 127.0.0.1 331
127.255.255.255 255.255.255.255 On-link 127.0.0.1 331
192.168.10.0 255.255.255.0 On-link 192.168.10.110 296
192.168.10.110 255.255.255.255 On-link 192.168.10.110 296
192.168.10.255 255.255.255.255 On-link 192.168.10.110 296
192.168.20.0 255.255.255.0 192.168.10.1 192.168.10.110 41
224.0.0.0 240.0.0.0 On-link 127.0.0.1 331
224.0.0.0 240.0.0.0 On-link 192.168.10.110 296
255.255.255.255 255.255.255.255 On-link 127.0.0.1 331
255.255.255.255 255.255.255.255 On-link 192.168.10.110 296