Hi,
I have a Win server running SAP B1 server behind a linux gateway in a network. I want to install openvpn on this linux gateway and be able to connect win xp clients over internet to access to the SAP server. I tried that. I am able to connect the client to linux server and have setup NAT rule to forward 1433, 1434 and 30000 port to win server but still I am not able to authenticate and access SAP server.
Any suggestions?
Regards
Gorav
SAP B1 over OpenVPN
Moderators: TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech
Forum rules
Please use the [oconf] BB tag for openvpn Configurations. See viewtopic.php?f=30&t=21589 for an example.
Please use the [oconf] BB tag for openvpn Configurations. See viewtopic.php?f=30&t=21589 for an example.
-
krzee
- Forum Team
- Posts: 728
- Joined: Fri Aug 29, 2008 5:42 pm
Re: SAP B1 over OpenVPN
Is this normal IP traffic?
You do NOT need a NAT entry.
You just need to push your route to clients, enable IP forwarding on the server, and make sure the gateway for the server's LAN has a route to the VPN. If the server IS the router for it's lan, then you just push a route to clients and you are done =]
http://secure-computing.net/wiki/index. ... PN/Routing
You do NOT need a NAT entry.
You just need to push your route to clients, enable IP forwarding on the server, and make sure the gateway for the server's LAN has a route to the VPN. If the server IS the router for it's lan, then you just push a route to clients and you are done =]
http://secure-computing.net/wiki/index. ... PN/Routing