OpenVPN Conenct IOS 9.0.2 Per-App VPN
Posted: Thu Oct 15, 2015 8:13 am
Hi guys!
OpenVPN Connect Version: 1.0.5 Build 1.77
OpenVPN Server: PFsense 2.24
IOS version: IOS 9.02 (running on Iphone 6 Plus)
Got a very frustrating problem, that i dont seem to resolve.
Im using an MDM solution to deploy OpenVPN configurations.
When i deploy the configurations to use OpenVPN as a regular VPN, "just On/Off functions" it works corretly, the tunnels come up and all the traffic are redirected via the tunnel correctly.
I run everything thru a Proxy aswell and the logs show the Connections correctly.
But when i deploy the configuration profile to use Per-App VPN, in my case i tested Google Chrome + Opera Mini it doesnt work.
The scenario is like this:
I deploy Google Chrome + Opera mini with Per-App VPN settings (to use my correct OpenVPN on-demand profile) that works in "regular" mode.
I start Google Chrome/Opera Mini, the Per-App VPN Connection starts (can see the VPN logo up in the left corner) If i open the OpenVPN connect app i even there see that the "profile" is connected
If i check my server i can see that my tunnel is upp with username/Ip and such.
But when i try to access any site in Google chrome/Opera mini (that are on the Per-App VPN session) nothing works, i cannot access sites via DNS or without it.
Nothing seems to go thru the tunnel.
If i check the OpenVPN connect app and look att my session i can see that send/recieve in data is only about 5-6kb, so again, nothing seems to even go thru the tunnel.
So my conclusion is that Per-app VPN is breaking the OpenVPN session.
since the same profile works flawlessly with "manuall On/Off function"
Ive googled like a maniac and tested multiple things on the OpenVPN server/client, but no change..
Hope someone got any advice/solution!
OpenVPN Connect Version: 1.0.5 Build 1.77
OpenVPN Server: PFsense 2.24
IOS version: IOS 9.02 (running on Iphone 6 Plus)
Got a very frustrating problem, that i dont seem to resolve.
Im using an MDM solution to deploy OpenVPN configurations.
When i deploy the configurations to use OpenVPN as a regular VPN, "just On/Off functions" it works corretly, the tunnels come up and all the traffic are redirected via the tunnel correctly.
I run everything thru a Proxy aswell and the logs show the Connections correctly.
But when i deploy the configuration profile to use Per-App VPN, in my case i tested Google Chrome + Opera Mini it doesnt work.
The scenario is like this:
I deploy Google Chrome + Opera mini with Per-App VPN settings (to use my correct OpenVPN on-demand profile) that works in "regular" mode.
I start Google Chrome/Opera Mini, the Per-App VPN Connection starts (can see the VPN logo up in the left corner) If i open the OpenVPN connect app i even there see that the "profile" is connected
If i check my server i can see that my tunnel is upp with username/Ip and such.
But when i try to access any site in Google chrome/Opera mini (that are on the Per-App VPN session) nothing works, i cannot access sites via DNS or without it.
Nothing seems to go thru the tunnel.
If i check the OpenVPN connect app and look att my session i can see that send/recieve in data is only about 5-6kb, so again, nothing seems to even go thru the tunnel.
So my conclusion is that Per-app VPN is breaking the OpenVPN session.
since the same profile works flawlessly with "manuall On/Off function"
Ive googled like a maniac and tested multiple things on the OpenVPN server/client, but no change..
Hope someone got any advice/solution!