Currently i use a full tunnel, but i got a problem with surf stick which dosn't allow to add route to his interface. So therefor I would like to switch to a split tunnel but I have two Public C subnetz which needs to betunneled.
How can i setup this?
I need:
10.x.x.x/8
172.16.x.x/12
99.1.x.x/24
99.2.x.x/24
The problem is iptables...how can i set this up?
Thanks for reply.
Split Tunnel
- Andrew
- OpenVPN Inc.
- Posts: 26
- Joined: Mon Oct 05, 2009 11:52 pm
- Location: /home/andrew
- Contact:
Re: Split Tunnel
OpenVPN Access Server will do this for you. You need to add those routes under the Routing Section on the VPN Settings Page.
-
- OpenVpn Newbie
- Posts: 2
- Joined: Fri Sep 16, 2011 8:33 am
Re: Split Tunnel
Do you mean this field?
Specify the private subnets to which all clients should be given access (as 'network/netmask_bits', one per line):
I tried to add a public IP 137.x.x.x Address with the result that i could not restart the server.
Specify the private subnets to which all clients should be given access (as 'network/netmask_bits', one per line):
I tried to add a public IP 137.x.x.x Address with the result that i could not restart the server.