Completely new to networking and this has somewhat been driving me insane for the better part of 4 days now. I have read 5 tutorials and cannot seem to get any of them to work.
Additional Config
Code: Select all
push "route 10.217.64.55 255.255.255.0"
push "dhcp-options DNS 10.217.64.186"
server 10.217.88.0 255.255.255.0
dev tun0
proto udp
keepalive 10 120
Code: Select all
remote myip 1194
client
dev tun
proto udp
resolv-retry infinite
nobind
persist-key
persist-tun
cipher aes-256-cbc
float
tun-mtu 1400
ca ca.crt
cert client2.crt
key client2.key
ns-cert-type server
comp-lzo
verb 3
Code: Select all
iptables -I INPUT 1 -p udp --dport 1194 -j ACCEPT
iptables -I FORWARD 1 --source 10.217.88.0/24 -j ACCEPT
iptables -I FORWARD 1 --source 10.217.88.1/24 -j ACCEPT
iptables -t nat -A POSTROUTING -s 10.217.88.1/24 -o br0 -j MASQUERADE
iptables -t nat -A POSTROUTING -s 10.217.88.1/24 -j MASQUERADE
iptables -I FORWARD -i br0 -o tun0 -j ACCEPT
iptables -I FORWARD -i tun0 -o br0 -j ACCEPT
I suspect it has to do with the fact that I can not seem to get a service to see 1194 as if it were open. Despite the fact that I have the IP table configured.
Edit: My bad, wrong section. Please delete.