IP Address Rollover Issues
Moderators: TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech
-
- OpenVpn Newbie
- Posts: 2
- Joined: Wed Aug 12, 2015 1:34 pm
IP Address Rollover Issues
I recently had to rollover to the next series of IP addresses and ports. When I did this, I was able to establish connection with the clients but can no longer access the systems with VNC. All of the systems that were on the previous IP address range are still connected and I can connect to them. I used the same tls-config file, but changed the port that is referenced. This is on a Windows based host and I am having trouble figuring out how to access the clients remotely. Any help would be greatly appreciated.
- Traffic
- OpenVPN Protagonist
- Posts: 4066
- Joined: Sat Aug 09, 2014 11:24 am
Re: IP Address Rollover Issues
Did you check your firewalls ?
-
- OpenVpn Newbie
- Posts: 2
- Joined: Wed Aug 12, 2015 1:34 pm
Re: IP Address Rollover Issues
Thanks for the reply. I did check the firewalls and made an exception for the port and the application both incoming and outgoing. The strange thing is that it works for the first IP address range, but the second and new range does not work.