Help needed on Single NIC Windows 2012 setup

Use this forum to share your network setup and what's been working for you.

Moderators: TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech

Post Reply
Chris761
OpenVpn Newbie
Posts: 1
Joined: Wed Jun 17, 2015 3:34 pm

Help needed on Single NIC Windows 2012 setup

Post by Chris761 » Wed Jun 17, 2015 3:41 pm

Hello

I have a single NIC server running Windows 2012R2 and OpenVPN server. I must confess that I am a newbie to OpenVPN. Here is my question:

What would be the .opvn server (and client) settings required to allow remote access to OpenVPN client users to the Windows 2012R2 server on 192.168.1.16 in addition to allow the same remote users access to all other computers on the 192.168.1.x subnet?

Thanks everyone!
Chris The Newbie :)

User avatar
Traffic
OpenVPN Protagonist
Posts: 4066
Joined: Sat Aug 09, 2014 11:24 am

Re: Help needed on Single NIC Windows 2012 setup

Post by Traffic » Thu Jun 18, 2015 3:28 pm

Sorry to be the bringer of bad news .. here is what you need to read:
HOWTO: Expanding the scope of the VPN to include additional machines

As a newbie, I recommend you read the entire Howto:
HOWTO: For OpenVPN Community Edition

Meserias
OpenVpn Newbie
Posts: 18
Joined: Sun Oct 17, 2021 3:01 pm

Re: Help needed on Single NIC Windows 2012 setup

Post by Meserias » Sat Aug 19, 2023 9:52 am

in plan words: each LAN device that needs to be accessed via OpenVPN by the remote clients need to have another route with higher METRIC beside the default one....

Post Reply